|
A
|
B
|
C
|
D
|
E
|
F
|
H
|
J
|
K
|
L
|
M
|
N
|
O
|
P
|
R
|
S
|
U
|
V
|
X
|
Z |
Next 50
|
|
|
|
|
|
Absolute ABS9020
- THD less than 0.05%
- Bass Boost (+5dB @ 100Hz)
- 2 OHM Stable Stereo
- Low/High Level Input
- Frequency Response: 20Hz - 20KHz
- Gain Control, Power Indicator
|
|
|
|
Absolute ABS9030
- THD less than 0.05%
- Bass Boost (5dB @ 100Hz)
- 2 OHM Stable Stereo
- Low/High Level Input
- Frequency Response: 20Hz - 20KHz
- Gain Control, Power Indicator
|
|
Absolute ABS9040
- THD less than 0.05%
- Bass Boost (5dB @ 100Hz) (3/4 CH)
- 2 OHM Stable Stereo
- Low/High Level Input
- Frequency Response: 20Hz - 20KHz
- Gain Control, Power Indicator
|
|
|
|
Absolute ABS9050
- THD less than 0.05%
- Bass Boost (0-18dB @ 45Hz)
- 2 OHM Stable Stereo
- Low/High Level Input
- Frequency Response: 20Hz - 20KHz
- Gain Control, Power Indicator
|
|
Absolute ABS9060
- THD less than 0.05%
- 2 OHM Stable Stereo
- Low/High Level Input
- Frequency Response: 20Hz - 20KHz
- Gain Control, Power Indicator
|
|
|
|
Absolute ABS9070
- THD less than 0.05%
- Bass Boost (0-18dB @ 45Hz)
- 2 OHM Stable Stereo
- Low/High Level Input
- Frequency Response: 20Hz - 2
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Absolute PRO21200
- Bridge and Tri Mode
- Stable Into 2 Ohms
- Short Circuit Protection
- Over Load Protection
- Protection Indicator
|
|
Absolute PRO21500
- Bridge and Tri Mode
- Stable Into 2 Ohms
- Soft Start and Muting
- Short Circuit Protection
- Over Load Protection
- Protection Indicator
|
|
Absolute PRO22000
- Bridge and Tri Mode
- Stable Into 2 Ohms
- Soft Start and Muting
- Short Circuit Protection
- Over Load Protection
- Protection Indicator
|
|
Absolute PRO2600
- Bridge and Tri Mode
- Stable Into 2 Ohms
- Soft Start and Muting
- Short Circuit Protection
- Over Load Protection
- Protection Indicator
|
|
Absolute PRO2800
- Bridge and Tri Mode
- Stable Into 2 Ohms
- Soft Start and Muting
- Short Circuit Protection
- Over Load Protection
- Protection Indicator
|
|
Absolute PRO41200
- Bridge and Tri Mode
- Stable Into 2 Ohms
- Soft Start and Muting
- Short Circuit Protection
- Over Load Protection
- Protection Indicator
|
|
Absolute PRO41600
- Bridge and Tri Mode
- Stable Into 2 Ohms
- Soft Start and Muting
- Short Circuit Protection
- Over Load Protection
- Protection Indicator
|
|
Absolute PRO4800
- Bridge and Tri Mode
- Stable Into 2 Ohms
- Soft Start and Muting
- Short Circuit Protection
- Over Load Protection
- Protection Indicator
|
|
Absolute PRO52200
- Bridge and Tri Mode
- Stable Into 2 Ohms
- Soft Start and Muting
- Short Circuit Protection
- Over Load Protection
- Protection Indicator
|
|
Adcom 30W x 2 Amplifier GFA 4302
- ADCOM amplifiers are designed to be used with 12 volt, negative ground vehicles. - ADCOM uses gold-plated speaker connector. - Capable of running stereo and mono configurations simultaneously. - Input sensitivity controls.
|
|
Adcom 30W x 2 Amplifier GFA 4304
- ADCOM amplifiers are designed to be used with 12 volt, negative ground vehicles. - ADCOM uses gold-plated speaker connector. - Capable of running stereo and mono configurations simultaneously. - Input sensitivity controls.
|
|
Adcom 40W x 2 Amplifier GFA 4402
- ADCOM amplifiers are designed to be used with 12 volt, negative ground vehicles. - ADCOM uses gold-plated speaker connector. - Capable of running stereo and mono configurations simultaneously. - Input sensitivity controls.
|
|
Adcom 40W x 2 Amplifier GFA 4404
- ADCOM amplifiers are designed to be used with 12 volt, negative ground vehicles. - ADCOM uses gold-plated speaker connector. - Capable of running stereo and mono configurations simultaneously. - Input sensitivity controls.
|
|
Adcom 70W x 2 Amplifier GFA 4702
- ADCOM amplifiers are designed to be used with 12 volt, negative ground vehicles. - ADCOM uses gold-plated speaker connector. - Capable of running stereo and mono configurations simultaneously. - Input sensitivity controls.
|
|
|
|
|
|
ads P450.2
- Watts/ channel 4 ohm: 50 x 4
- Watts/ channel 2 ohm: 75 x 4
- Watts/ bridged 4 ohm: 150 x 2
- THD: 0.10%
- S/N ratio: >90dB
- Bandwidth: 10-30kHz
- Damping factor: >150
|
|
|
|
ads P650.2
- Watts/ channel 4 ohm: 50 x 6
- Watts/ channel 2 ohm: 75 x 6
- Watts/ bridged 4 ohm: 150 x 3
- THD: 0.10%
- S/N ratio: >90dB
- Bandwidth: 10-30kHz
- Damping factor: >150
|
|
|
|
ads P850.2
- 50watts x 8 @4ohms
- 75watts x 8 @2ohms
- 150watts x 4 bridged @4 ohm
- THD:0.10%
- 45-5kHz/ 12dB
- Dimensions:13" x 2" x 16 1/8"
|
|
ads PH30.2
- Watts/channel 4 ohm: 75x6
- Watts/channel 2 ohm: 110x4 + 150 x 2
- Watts/bridged 4 ohm: 220 x 2 + 300 x 1
- THD: 0.10%
- S/N Ratio: >90dB
- Bandwidth: 10-30kHz
- Damping factor: >150
|
|
ads PQ40.2
- 100watts x 4 @4ohms
- 150watts x 4 @2ohms
- 300watts x 2 bridged @4 ohm
- 45-5kHz/ 12dB
- Dimensions:13" x 2" x 16 1/8"
|
|
ads PX-series
Advanced DSP and multichannel amplification are combined in the PX/a to create a no-holds-barred approach to mobile electronics.
|